At some point in your car’s life you will likely have to purchase a new battery. Your vehicle’s battery can die from a variety of reasons. It could be that the battery was getting older, or it could simply be leaving a light on in your vehicle.
Either way, if your battery is dead, you will likely have to purchase a new one and install it. However, if there is an electrical issue that needs to be addressed it is recommended that you take your car in for a checkup to determine the cause of the drained battery. If not addressed, you may have to replace your vehicle’s battery again, which can be annoying and can get pricey.
Generally the process for getting and installing a new battery is an easy one. You just take out the old battery and install the new one and that is that. Other times, however, you may experience a stalling problem. Different vehicles may have different reactions when it comes to installing a new battery. Once such reaction may include stalling. Another thing you may experience are electrical issues. It is important to understand why this issue may occur and what you should do in order to prevent this.
As cars have developed and improved on their technology, their electrical systems have also improved. Obviously having more sophisticated systems is good, but sometimes there can be problems as a result of relying on software. Your car has a computer in it that helps it perform properly. These systems are usually adaptive and as your car ages, they begin to compensate for the slowness of your vehicle. This adaptive memory is stored in your vehicle’s volatile random access memory, also referred to as the VRAM.
When you go to change your battery, and your car’s computer software is disconnected from the power, there is a chance that you may reset your car’s memory to the original default settings. Even if you have only disconnected the battery for a short amount of time, they can potentially lose the memory that was stored in their VRAM. This also could include the settings for the engine’s idle, which would cause your car to stall.
When the VRAM has been reset it also means that your car will have to relearn all of the settings it has to compensate for the age of your car. It is possible for your car to relearn them though, so even if you do lose all of your settings, hope is not entirely lost!
While your car can relearn your settings for the vehicle’s optimal performance, a far better solution is to avoid that issue altogether. There is a simple tool that you can use to save your memory. The memory saver is a device that is plugged into a source and provides enough energy to your system that it will be able to retain all of the settings that your vehicle had.
If you need help deciding which battery is right for you and installing it without wiping your VRAM, our technicians at Euro Plus Automotive would be more than happy to help. When it comes to getting and installing a battery we understand that people may not always know what to get or simply don’t have the time to do it. Our team of experts is committed to providing excellent customer service and care. We work with our clients to determine the cause of their issues and find a solution that works best for them.
We are convenient to residents of Canoga Park, Woodland Hills, San Fernando Valley, and Los Angeles County, CA, and are able to help resolve any issues you may be experiencing with your vehicle, from regular maintenance to intensive repairs. Our technicians are trained in the latest methods and technologies for car repair and maintenance. Our goal is to ensure your vehicle has a long life. If you would like to learn more about the services we offer, or would like to schedule an appointment, visit our website or call our office where a representative will be more than happy to assist you.
Understanding the various components in your car and how they function is important. It is good to know why certain things are needed and what their purpose is. By having a clear understanding of how your vehicle works, you will be able to properly maintain it and to know what to do when something goes wrong. Even just basic understanding of how your vehicle works can help a tremendous amount, even if it just helps you know when you should go to the mechanic.
It is recommended by most mechanics that you get regular service checkups as a preventative measure for larger, more expensive issues. Having a trusted mechanic who is familiar with working on your type of car is extremely helpful, because they will be familiar with common issues relating to your vehicle and will also know what problems to look out for.
An important part to keep an eye on is your head gasket. The head gasket is a vital seal to your vehicle’s engine, so if this part should fail, it is something you will want to get replaced quickly. Gasket sealer can help your gasket last longer if you end up needing to have it replaced.
Depending on the age of your vehicle, a head gasket replacement is something you may want to prepare for. As cars age, the head gasket seal is something that is bound to wear out and need replacing. Since the material is made of steel, or even sometimes cork, they can wear out over time. Like with most issues, there will be signs you may start to notice that would indicate a faulty head gasket. The head gasket is located between the car’s engine block and cylinder head and acts as the seal between the two.
If your car starts to overheat, this could cause your gasket to wear out and need replacing. It may also mean that fluids could get inside your engine. If that occurs, it could cause a number of issues, like your cylinder head warping. Through having consistent and regular checkups your trusted auto repair shop will be able to tell you if your car’s gasket needs to be replaced. When you need to have your gasket replaced, it is a much simpler problem (and much cheaper, too) to deal with than fixing a warped cylinder.
Gasket sealant is a glue-like substance that is added to the new gasket when it is installed. It helps the gasket adhere to the seal, preventing even the tiniest of leaks. It is not necessary on every head gasket, but many mechanics like the additional security it provides.
There are signs you can look out for that will likely be an indicator that your gasket needs to be replaced. One common issue is that you may start to notice a white or yellow substance inside the cap of the oil filler.
Another issue that you may experience is blue or white smoke being emitted from your car’s exhaust. White smoke could indicate that your coolant may be leaking into your combustion chamber. If blue smoke it could indicate that oil may be leaking into the combustion chamber and burning. If either are the case, you should visit a professional auto repair shop to have your vehicle inspected.
If your auto repair shop recommends a head gasket replacement, ask about whether gasket sealer would be a good addition to your engine. It may raise the cost a bit, but can help prevent a repeat of the gasket failure.
At Euro Plus Automotive, we are committed to helping our clients with their vehicles by having our skilled technicians diagnose and repair your car, using the latest methods in automotive repair technology. We are located conveniently to Canoga Park, Woodland Hill, San Fernando Valley, and Los Angeles County, CA, so if you need to have your car inspected for a faulty gasket, we would be glad to help. We can also talk about the benefits of gasket sealer with you, so you can decide if it is the best choice for your car.
If you would like to schedule an appointment or learn more about other services we provide, please visit our website or call our office where a representative will be able to help you.
Error: The account for europlusautomotive needs to be reconnected.
Due to recent Instagram platform changes this Instagram account needs to be reconnected in order to continue updating. Reconnect on plugin Settings page